PATENTED JET PUMPS
With the capability of being installed in both deviated and horizontal wells the patented line of JJ Tech jet pumps makes them some of the most versatile artificial lift systems in the industry. Combined with no moving parts downhole and a hydraulically retrieved carrier assembly, the JJ Tech jet pump eliminates the workover rig for routine maintenance. Whether it’s due to sand and solids production or gas locking from a high GLR, the JJ Tech jet pump is an ideal solution for troublesome wells. Combined with no moving parts downhole and a hydraulically retrieved carrier assembly, the JJ Tech jet pump eliminates the workover rig for routine maintenance.
Using the JJ Tech Pump Analyzer we can assure that the system is operating at maximum efficiency. This allows for boosting production while minimizing the surface horsepower consumption thus saving the operator on their monthly costs.
2.5 SELECT-JET
Hydraulic Jet Pump
JJ Tech’s flagship model 2.5 SELECT JET Jet Pump brings ease and versatility to the artificial lift market.
Whether run in Normal or Reverse Flow mode, 2.5 SELECT JET is the best of its kind.
2.5 SELECT JET 1P
& High Volume Jet Pump
JJ Tech’s 2.5 SELECT JET 1P and HV Jet Pumps are single unit pumps that provide greater flow passages than traditional Jet Pumps.
These versatile pumps can be adapted to fit inside most any Jet Pump BHA on the market.
2″ SELECT JET
Normal & Reverse Flow
JJ Tech’s 2″ SELECT JET Jet Pumps are single unit pumps that provide greater flow passages than traditional Jet Pumps.
These versatile pumps can be adapted to fit inside most any Jet Pump BHA on the market.
1.66″ CS Jet Pump
Concentric String
Jet Pump
JJ Tech’s Model 1.6 is commonly used in a concentric string configuration for Gas Well Deliquification. Jet Pump is run in on Coiled Tubing or small Integral Joint tubing inside of production tubing. The Jet Pump Carrier is easily retrieved to the surface by pumping in reverse. Nozzle and Mixing Tube changes are easily done due to the simplicity of the tool.
Adaptation Jet Pumps
Sliding Sleeve / Existing BHA
JJ Tech Tech’s versatile pumps can be adapted to fit inside any Jet Pump BHA or Sliding Sleeve on the market.
JJ Tech stocks numerous adaptations ready to ship worldwide.
2.8 JET PUMP
Integral Standing
Valve Jet Pump
JJ Tech’s Model 2.8 is commonly used for permanent installations as well as Frac Evac. The very simple yet effective design has been JJ TechTech’s “Work HorseHorse” Jet Pump since 2002. The Jet Pump Carrier is easily retrieved to the surface by pumping in reverse. Nozzle and Mixing Tube changes are easily done due to the simplicity of the tool.
2.5 SELECT JET
Gen II Equalizing Standing Valve
The 2.5 SELECT JET Standing Valve is the highest quality equalizing check valve in the industry.
17 4 PH Stainless Steel construction allows for the highest tensile strength available. It is equipped with dual ¼ ” knockout plugs for rapid equalizing of the wellbore prior to removal.
SELECT JET BHA
Bottom Hole Asembly
JJ Tech’s SELECT JET Bottom Hole Assemblies allow for maximum flexibility inside the tubing string. Common Profiles are incorporated into the BHA so additional connections are minimized. Large flow thru ports allow for reduced velocity between tubing and casing.
CASING ISOLATION SLEEVE is available and adds greater reliability than self contained Sliding Sleeves.
Gauge Carriers
Downhole Pressure /
Temperature Data Loggers
The SELECT JET line of Jet Pumps has the ability to carry a Down Hole Pressure/Temperature Gauge to record Pump Inlet Conditions.
Collecting Down Hole data is very useful when optimizing the performance of of the Jet Pump.
2.5 SELECT JET Jet Hydraulic Pump
- Versatile Bottom Hole Assembly with High Flow Capacity
- Nozzle and Mixing Tube changes are simple due to small, easy to handle, JJ Tech Carrier design
- Available Isolation Sleeve ensures reliability over Sliding Sleeve
- Ability to attach down hole gauges to Standing Valve
- Ability to run and retrieve down hole gauges without Wireline (Normal Flow Pump
- All Viton elastomers (O Rings)
- PEEK / Teflon Vee Packing
- Standing Valve has 1.25″ NPT Lower Thread for Strainer Nipple / Attachment or down hole gauge.
- Standard Materials are 17 4 PH Stainless Steel (QPQ)
- Premium Materials Include:
Inconel 625 Hastelloy X 316 Stainless Steel
420 Stainless Steel ( Boron Carbide Clad
2.5 SELECT JET 1P & High Volume Jet Pump
- Versatile Bottom Hole Assembly with High Flow Capacity
- Available Isolation Sleeve ensures reliability over Sliding Sleeve
- Ability to attach down hole gauges to Standing Valve
- Ability to run and retrieve down hole gauges without Wireline (Gauge is run inside the pump)
- All Viton elastomers (O Rings)
- PEEK / Teflon Vee Packing
- Standing Valve has 1.25″ NPT Lower Thread for Strainer Nipple / Attachment or down hole gauge.
- Standard Materials are 17 4 PH Stainless Steel (QPQ)
- Premium Materials Include:
Inconel 625 – Hastelloy X – 316 Stainless Steel
420 Stainless Steel ( Boron Carbide Clad)
2″ SELECT JET Normal & Reverse Flow
- Versatile Bottom Hole Assembly with High Flow Capacity
- Normal, Reverse Flow and 2X Models Available 2X is High Volume Pump
- Available Isolation Sleeve ensures reliability over Sliding Sleeve
- Ability to attach down hole gauges to Standing Valve
- Ability to run and retrieve down hole gauges without Wireline (Gauge is run inside the pump)
- All Viton elastomers (O Rings)
- PEEK / Teflon Vee Packing
- Standing Valve has 1.25″ NPT Lower Thread for Strainer Nipple / Attachment or down hole gauge.
- Standard Materials are 17 4 PH Stainless Steel (QPQ)
- Premium Materials Include:
Inconel 625 – Hastelloy X – 316 Stainless Steel
420 Stainless Steel ( Boron Carbide Clad)
1.66″ CS Jet Pump Concentric String Jet Pump
- Multiple exit ports improves discharge flow distribution
- 1.6 Production Rates up to 600 bbls/day
- Nozzle and Mixing Tube changes are simple due to small, easy to handle, JJ Tech Carrier design
- Housing Materials Available:
- 17 4 PH Standard
- 316 Stainless
- 420 SS Boronized
- Hastelloy X
- Versatile Top And Bottom Connections
- All Viton elastomers (O Rings)
- Anti Hang Standing Valve design prevents fluid from entering the formation
Adaptation Jet Pumps Sliding Sleeve / Existing BHA
- Normal and Reverse Flow Adaptations are available
- JJ Tech can adapt to any API Sliding Sleeve
- All Viton elastomers (O Rings)
- PEEK / Teflon Vee Packing is our standard
- Standard Materials are 17 4 PH Stainless Steel (QPQ)
- Current adaptations are:
- All Weatherford, Trico, Kobe, Petrolift, & Oilmaster, BHA BHA’s
- CD 6000, Baker L, Otis R,X,&D, Halliburton Dura Sleeve
- Sealbore Sizes 1.78″, 1.87″, 2.31″, 2.78″, 2.81″, 3.81″
- Premium Materials Include:
Inconel 625 – Hastelloy X – 316 Stainless Steel
420 Stainless Steel ( Boron Carbide Clad) - JJ Tech can also supply Equalizing Standing Valves to set in existing completions.
2.8 JET PUMP Integral Standing Valve Jet Pump
- Welded Diffuser design ensures Flow Capacity with
comingled solids - 2.8 Production Rates up to 7000 bbls/day
- Nozzle and Mixing Tube changes are simple due to small, easy to handle, JJ Tech Carrier design
- Compatible with Memory Carrier so operator can log true Pumping Bottom Hole Pressure and Temperature without the use of Slick Line unit
- All Viton elastomers (O Rings)
- Proprietary GPD (Boron Carbide Clad) on Housing to prevent wear and corrosion damage
- Anti Hang Standing Valve design prevents fluid from entering the formation
2.5 SELECT JET Gen II Equalizing Standing Valve
- Proprietary anti hang ball cage design
- Silicon Nitride Ball has 1/3 mass of Titanium Carbide
- Tungsten Carbide Ball Seat
- All Viton elastomers (O Rings)
- 17 4 PH 1150HH Construction
- Inconel 625 Available
- 1.25″ NPT Lower Thread for Strainer Nipple / Attachment
- Dual ¼ ” Kobe Type Knockout Plugs (316 or NAB)
SELECT JET BHA Bottom Hole Asembly
- High Volume Flow Ports (6.47″ or 3.68″)
- Available Casing Isolation Sleeve
- X Profile Top (2.31″ or 1.87″)
- Bottom No Go (2.250″ or 1.796″)
- 2″ SJBHA has 1.87 XN Profile
- Blast Joint wall thickness
- Standard Material 17/4 PH
- Inconel 625 Available (Special Order)
- QPQ Coating for Anti Galling of threads 2020
Gauge Carriers Downhole Pressure / Temperature Data Loggers
- DH Gauge can be hydraulically retrieved without the need for Slick Line Services
- Data Can Gauge is Inconel Construction
- Gauge logs data points every 60 seconds for 30 days
(Depending on BH Temperature) - All Viton elastomers (O Rings) and PEEK Seals
