JJ Tech has developed a series of cutting edge hydraulic jet pumps that have significantly increased the effectiveness of conventional artificial lift through a unique, patented design that contains no moving parts down hole.
Below are a few of the JJ Tech jet pump system options that well operators may choose from:
The JJ Tech 1.6 Jet Pump
Production – Up to 600 bpd
For slim hole installation
Used in the casing isolation
Can be run inside 2.375 tubing or larger
Can be run on 1-1/4” IJ or 1-1/4” Coil Tubing or larger
Is effective in the de-watering of gas wells
The carrier can be retrieved by reverse circulation or wire line
Length approximately 18″
The JJ Tech 2.3/2.8 Jet Pump
Production 2.3 – Up to 4500 bpd
Production 2.8 – Up to 4500 bpd
Fits inside 4.5 casing and up
Can be run on 2.375 tubing or larger
For conventional oil producing
Adaptable to the JJ Tech memory tool to record BHP and temperature
The carrier can be retrieved by reverse circulation or wire line
Length approximately 18″
The JJ Tech 2.5 & 2.0 Select Jet
Production 2.5– Up to 4500 bpd
Production 2.0– Up to 4500 bpd
Wireline retrievable, the standing valve allows operators to work below the perfs without pulling the well
Isolation sleeve is available to isolate the tubing from the casing
Can be installed without killing the well
JJ Tech is the leader in jet pump innovation, where production and efficiency are paramount. JJ Tech’s cutting edge jet pump systems are designed for vertical, horizontal, and deviated wells, where retrieval would typically be problematic.
We manufacture pumps of all different sizes to fit any tubular, bottom hole assembly, and production volume you may desire. (Note: The 2.0 and 2.5 SELECT-JET jet pumps are not in this photo.)
Artificial Lift Comparisons
